|
Start Your Engines! 21205 Fuel System Revitalizer - 4 Fl oz.
Price: $7.32
Availability: Usually ships in 24 hours
|
| Brand |
Start Your Engines! |
|
|
Customers Reviews
2010-06-14
Okay, I am amazed...
I have a Craftsman Lawnmower with a 5.5HP Honda engine I bought in 2000. Living in FL and TX, this sucker has been used hard. Over the last 2 years this mower has been harder and harder to start. I changed the spark plug, the air filter and even took the carb out, blew it out with compressed air and soaked it in carb cleaner for 3 days. After all that, still 15-20 pulls to start. Over the past 3 months I resorted to spraying engine starter in the carb to get the darn thing going.
I thought long and hard about a new mower, I mean heck this thing is 10 yrs old. Well, I saw the commercial for this on TV, so I thought, one last ditch effort to keep some hard earned money in my pocket and not buy a new mower.
Well, I poured in 1/2 a bottle and added new gas. It started on the 3rd pull. I was AMAZED, but also thought, sure it will start now, but what about in a week?---Well today was one week later. I went out and pulled, and it started in the first pull...UNREAL!!!!
I'm not sure how long this will last, but right now I am very happy. Buying 2 bottles of this per season, is alot cheaper than buying a new mower. :-)
|
2010-04-29
This product is amazing!
I had 2 gas mowers that had set with gas in them all winter and a roto tiller that had sat for about three years with gas in it. All three started within 3 to 4 pulls after using this product. This product is absolutely amazing. I would recommend this to anyone with small gas powered engines.
| 
2009-10-19
A Small Caution
Product worked well, got a wood chipper that has not started without starting fluid for 3 years to start on the first pull, something it newer did since I've owned it.
Also a weed wacker that had been in storage for 2 years.
However on a snow blower that was in storage for 10 years, it worked too good. Something that was likely held together by gunk, began to leak.
So for something that's been in storage for a real long time. Check first for hoses etc. that have physically deteriorated before using.
|
|
|
Auto Sound: Where to Start? Part 1Don't like the sound of the basic audio system? It is a normal state of things. But at the same time there appears a classic question: "What to do?" Let's see…
 
More often the owners of the middle-class cars (the cost of which varies from $20 000
As a rule, the various basic filling of such cars does not offer great audio variants: often not more that 2-3 types of audio system. Moreover, the will most definitely differ onlty by the number of loud-speakers.
The minimal variant of middle-class audio system is the following – 4 loud-speakers and a player, the max variant – 13 loud speakers. It should be mentioned that in fact the middle class audio systems are installed for the sake of it. Sometimes even if the client orders the top variant of the available audio systems he/she is not satisfied with the
The system must be developed, and the development includes a number of steps, beginning from minor things.
  
Step 1: Replacing Loud Speakers
The first thing to be done is the replacement of the basic loud speakers to high-performance ones.
After that you have to conduct the minimal audio-preparation. It means preparing the doors to the installing of the loud speakers – damping niches and removing vibration. In this case the basic player is left and everything is installed by the basic wire configuration.
The replacement of the acoustics and noise insulation in a car service will cost the owner around $600 – 1000. After that the sound will change sufficiently and the quality will increase as well.
Many owners come to a halt after that. If the owner don’t have other special preferences and he/she listens to the music while driving, the first step is enough.
  
Step 2: Installing Amplifier
If the first step is not enough, there comes the second step – installing additional amplifier. It is made not for the loudness’ sake but for the increase in the quality of the sound. The basic amplifier causes noise when the vol. is enhanced.
The additional amplifier enables the wide swing of the signal reaching the loud speakers. To sum up, with the additional amplifier the sound gets better and purer.
Still there is a problem – not a single basic player has line-outs for the additional amplifier. You will have to get the connection manually.
The easiest way out is called the "passive": when a chip reducing the level of line-out signal is installed.
Such a chip is not sky-high expensive: $40 – 80. At the same time the level of noise from the basic player is not reduces and it is transmitter to the amplifier. The advantages of such a mode are the simplicity of installation and the minimum intrusion into the basic audio system.
More advanced variant are so-called “active” systems, which process the signal “intellectually”. As a rule the devices cost from $200 to $600.
  
Still the most advanced mode is the development of the basic player and adding line-out to it. In order to do it, the player is dismantled, the connection spot to the inbuilt amplifier is found and the signal is taken out. The work costs around $300.
To be continued... (Auto Sound: Where to Start? Part 1)
Automotive Parts Articles From Around the WEB - September 22-30, October 1-2, 2007
auto part, performance car part, car body part, auto car part, car accessory, car part, custom car parts, cars, autos, vehicles, auto sound |
 |
|
|
;){kind=link}
